Показано с 1 по 3 из 3
Like Tree6Likes
  • 2 Post By abcd567
  • 2 Post By abcd567
  • 2 Post By abcd567

Тема: Automated Installation of AcarSDeco2

  1. #1
    Радиозонд
    Регистрация
    31.08.2019
    Город
    canada
    Сообщений
    36
    Downloads
    0
    Uploads
    0
    Automated Installation of AcarSDeco2 on Raspberry Pi 2/3/4 and Raspbian Stretch / Buster

    (1) Easy Installation - Just copy-paste one command to run bash script and it does everything.

    (2) Automatic start - systemd service automatically starts it at boot/reboot.

    (3) Easy monitoring & control - Provides commands systemctl status, systemctl stop, systemctl start, and systemctl restart.

    (4) Easy configuration - Provides a separate config file in simple format, each config item on a separate line.


    FOR DETAILED INSTRUCTIONS:

    https://github.com/abcd567a/ad2/blob/master/README.md
    Rumlin and MiB like this.

  2. Пользователь сказал cпасибо:
    Disp (02.09.2019)
  3. Ksuxa ATC

  4. #2
    Радиозонд
    Регистрация
    31.08.2019
    Город
    canada
    Сообщений
    36
    Downloads
    0
    Uploads
    0
    Two More Automated install scripts for installation on Raspberry Pi 2/3/4, Raspbian Stretch/Buster

    ModeSMixer2
    https://github.com/abcd567a/mm2/blob/master/README.md


    ModeSDeco2
    https://github.com/abcd567a/md2/blob/master/README.md
    Rumlin and MiB like this.

  5. #3
    Радиозонд
    Регистрация
    31.08.2019
    Город
    canada
    Сообщений
    36
    Downloads
    0
    Uploads
    0
    Running ModeSDeco2 AND AcarSDeco2 on Same Pi

    If you want, ModeSDeco2 and AcarSDeco2 can be installed on the same RPi, provided:

    (1) Two DVB-T dongles are plugged into RPi, one for ModeSDeco2, other for AcarSDeco2.

    (2) The two dongles are serialized so that each software use its respective dongle+antenna. The dongles can be serialized, say 00000101 & 00000102. In addition, following to be added in config of the two softwares

    ModeSDeco2 config:
    --device-serial 00000101

    AcarSDeco2 config:
    --device-serial 00000102

    How to serialize dongles

    (1) Prepration
    Код:
    ## Install necessary tool
    sudo apt update
    sudo apt install rtl-sdr
    
    ## Stop all programs which use the dongle
    sudo systemctl stop md2 ad2
    (2) Serialize Dongle for ModeSDeco2
    Код:
    ## Plug the dvbt dongle you want to use for ModeSDeco2 (UNPLUG ALL OTHER Dongles)
    ## Issue following command. 
    ## The command will ask [y/n], type y for yes.
    
    rtl_eeprom -s 00000101
    
    ## Un-plug the dvb-t dongle
    (3) Serialize Dongle for AcarSDeco2
    Код:
    ## Plug the dvbt dongle you want to use for AcarSDeco2 (UNPLUG ALL OTHER Dongles)
    ## Issue following command. 
    ## The command will ask [y/n], type y for yes.
    
    rtl_eeprom -s 00000102
    
    ## Un-plug the dvb-t dongle
    (4) Now re-plug both dongles

    (5) Check that dongles have been correctly serialized
    Код:
    rtl_test -t
    (6) Reboot Pi to restore it to normal
    Код:
    sudo reboot
    Rumlin and MiB like this.

 

 

Похожие темы

  1. Ответов: 26
    Последнее сообщение: 27.11.2017, 09:15
  2. Ответов: 168
    Последнее сообщение: 17.08.2015, 12:14

Что искали прежде чем попасть на этот форум:

Nobody landed on this page from a search engine, yet!
ADSBRADAR.ru

Метки этой темы

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Powered by vBulletin®
Русский перевод: zCarot
(с) ADSBRADAR.ru 2011-2012
Текущее время: 08:59. Часовой пояс GMT +4.
Skin by CompleteVB
Яндекс.Метрика
Search Engine Optimization by vBSEO